ZASDAR Lifepo4 12V 60Ah Bluetooth Lithium Battery Charger

Zasdar 12.8V LiFePo4 (lithium-ferro phosphate) battery, capacity 60 Ah total 760 Wh. Whit Bluetooth and 10 Ah LiFePo4 charger. Ideal for Caravans, camper transformations, nautical, robotics, camping, isolated homes, solar battery bank and multiple applications where an accumulation battery is needed. By changing your lead, Gel or AGM battery you will get multiple advantages. This model equips Bluetooth and a basic 10Ah / h charger. You can access the battery information through your mobile. Loads, status, etc Great economy of use and performance estimated with approximately 70% capacity. (technology is proven dating back to 1996) the useful life of any battery depends on many factors, uses, type of charges and discharges, work environment, etc. Life and performance estimation in deep cycles (100% charge and discharge): - 1 / 2,000 cycles 80% dod (dod means depth of discharge) - 2 / 5,000 cycles 65% dod. - 3 / 8,000 cycles 40% dod. 8,000 cycles are equivalent to a daily charge and discharge It is the technology that offers the longest duration and significant savings compared to other types of batteries. A very important advantage in multiple applications is its lighter weight and volume. Our batteries weigh approximately 70% less than a lead, Gel or AGM battery of the same nominal power. Allows downloads up to 100%. It is advisable not to regularly exceed 90% of its load capacity and 20% of discharge. A traditional battery only allows regular use of between 60% and 40% of its nominal capacity. It allows the parallel connection of up to 4 elements, obtaining a higher amperage. They cannot be connected in series. A single 7 kg battery. It offers the performance of 1 traditional battery with a weight of 35 Kg. Saving weight, volume, fuel, etc. More safety than in other technologies, the decomposition temperature of lithium iron phosphate is around 600 ° C, thus offering maximum safety and stability unlike other types of lithium battery. They incorporate a latest generation BMS (Battery Management System) that manages 8 factors of performance, safety, temperature, cell balancing, charges, discharges, overcurrent, short circuits, battery use, etc. LiFePo4 batteries have no memory effect and can be used immediately after charging. The self-discharge rate is extremely low, depending on the ambient temperature between 1.5% and 3% per month. They can be stored for a year without any problem. Maintenance-free throughout its life. Our LiFePo4 batteries do not contain heavy metals, rare metals, or contaminants such as cobalt. They are built with 3.2V Grade A Prismatic cell with a composition: Lithium Iron Phosphate Carbon Coated (38.86%), Graphite (18.20%), Organic Electrolyte (22.30%), Aluminum (14.76 %), Copper and Polypropylene. No danger of leaking gases, acids or electrode sulphation. The battery performance curve maintains a continuous voltage delivery for 90% discharge. Being an accumulation battery, the discharge peak is 1,500W for a maximum of 2.5 seconds. Our batteries have a low level of resistance to charging. The ideal charge range is 0.2C, that is, a charge of 20% every hour. They can be charged up to 0.5C 50% per hour. Bearing in mind that it is not usual to charge 100% in each charge. The ideal discharge rate is 0.10C to 0.25C this assumes use between 10 and 4 hours. It is possible to reach a rate of 0.5C, discharge in 2 hours. Wide working range, load between 0º and 45º and use between -20º and 60º. In order to obtain the maximum performance and life from a LiFePo4 battery, a charger suitable for charging LiFePo4 batteries should be used. This is possible in vehicles and nautical through a DC / DC charger installed between the alternator and the battery, in this capacity 12V 20A-30A, or using an inverter charger with which we can charge and have current at 220V AC. All of our Zasdar batteries have individually passed factory quality control tests to provide a durable and efficient product.