WHEELS MANUFACTURING Bearing Extractor 30 mm

Бестселлер
116080248
7 792 ₽

Мы собрали лучшие предложения по оригинальным брендовым товарам из зарубежных магазинов, выстроили надежную систему доставки и не тратим средства на аренду торговых помещений - это позволяет сделать цены для вас намного ниже местных магазинов. 

Непривычно покупать качественные вещи дёшево? Пора начинать это делать вместе с LiteMF Market!»

Характеристики

Прочие свойства

Бренд
Wheels Manufacturing

Свойства

Цвет
Черный

Описание

6806 (30mm) Sealed Bearing Extractor.

Individual extractor for removing 6806 sealed bearings with 30mm inside diameter.

These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component.

Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing.

Tap the extractor & bearing out together with a punch and hammer.

All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor.

If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.

Bearing extractor requires the following tools:(1) 17mm open or box end wrench.

(1) 1´´ open end wrench.

(1) Punch (diameter should be smaller than 30mm.).

(1) Hammer