VICTRON ENERGY Multiplus 24/5000/120-100 Charger

The Inverter Charger Victron Phoenix MultiPlus 24/5000/120-50 is a pure wave current inverter of the Phoenix Multiplus range with a power of 5000W of direct current (10000W Peak) at 24V voltage.

It converts your 24V installation to a 220V system to be able to connect any domestic appliance to your system in a totally safe way trusting the leading brand in electronic devices for clean energy the Victron PMP245021010 Inverter also features a built-in battery charger with variable charging technology at 120-100 Ampere load and a high-speed AC transfer switch.

UNINTERRUPTED ALTERNATING CURRENT (SAI FUNCTION):

Victron Phoenix Multiplus inverters, in the event of a blackout or disconnection to power.

The integrated inverter automatically activates automatically taking over the supply to power the connected loads the Phoenix MultiPlus 24/5000/120-50 makes this switching so fast (less than 20 milliseconds) that your equipment will continue to operate without interruption.

REMOTE MONITORING AND CONTROL:

Victron Phoenix Multiplus inverters, can be controlled and monitored locally (LAN) and remotely with Victron´s free APP.

You can access from any device compatible with the Victron Energy APP.

Using the Color Control GX or Venus GX you can adjust your Victron Phoenix MultiPlus Inverter Charger 24/5000/120-50 without limits.

Trust Victron Energy, a leading brand in renewable energy production and control.

Features:

- Multifunctional, with intelligent power management the MultiPlus offers you, in a single housing, a powerful sine wave inverter, a sophisticated battery charger with adaptive technology and a high-speed AC transfer switch in addition to these main functions.

The Victron MultiPlus Compact inverters have other advanced features.

- PowerControl - Limited power from generator, shore power or from the grid in the MultiControl Panel a maximum current from the generator or the shore power can be set the MultiPlus will take over other AC loads and use the excess current for charging, thus avoiding overloading the generator or shore power.

- Dual AC output the main output has the ´uninterruptible´ function acting as a UPS the MultiPlus takes care of battery charging in the event of a blackout or disconnection of the mains or generator the second output is only active when AC power is supplied to one of the MultiPlus inputs.

Devices that should not discharge the battery, such as a heater, heating and other power-hungry components, can be connected to this output.

- Three-phase operation in addition to parallel connection, 3 units can be configured for 3-phase output.

Parallel connection can be switched toge ther with three-phase connection, i.e with 3 banks of 6 units we can obtain a 45/54kVA three-phase inverter and a 1260A charger.

Unlimited possibilities.

- PowerControl - Limited power from generator, dock or grid:

Victron Multiplus are very powerful battery chargers therefore, it will use a lot of current from the generator or the grid it is connected to the maximum limits can be set on the Multi Control panel the MultiPlus will take into account the other AC loads and use the excess current to charge the batteries, thus avoiding overloading our AC source.

- Variable 4-stage charger and dual battery bank charging the main output provides a powerful charge to the entire battery system by means of sophisticated variable charging software.

All this is done in an automated way without any major problems in the configuration of the charging of your battery system.