Tempish Viber 110 1000004611 rollers

TEMPISH Viber 110 rollers

Properties:

• TEMPISH VIBER 110 skates combine a hard freestyle boot with the speed of large 110 mm wheels.
• A special universal model designed both for shorter routes in the city and, thanks to the large wheels, also for trails.
• This skate is suitable for advanced and experienced skaters.
• The skates with a hard frame are intended for universal use due to their design and equipment.
• Maneuverability is easy thanks to the short runner.
• The skate is equipped with a combination of three 110mm wheels, thanks to which you can reach high speeds while driving.
• It is also possible to mount smaller wheels (minimum recommended size 90mm).
• The skeleton of the skate is well ventilated - the ventilation reaches the foot thanks to the ventilated insole, which has holes around the entire circumference, including the tongue.
• The roller joint uses a screw with a special nut and washer, thanks to which the cuff is removable and can be tightened if necessary, which also guarantees a longer life than the universal rivet.
• The top metal self-locking buckle has a bend at the end for a better grip.
• The strap is attached to the frame so that it does not catch on the second roller during slalom and freestyle, the buckle itself is protected from damage by the bottom plastic tab.
• The instep strap is equipped with a single-step micro buckle with very comfortable tightening and loosening thanks to a ratchet system.
• The plastic pads on the outside of the skates are removable, as is the padding strap.
• The lace holes feature strong metal rings to protect the laces and provide a better fit.
• Thanks to the use of waxed laces with a width of 10 mm, it is possible to gradually tighten the laces and more effectively close the skeleton of the skate.
• The roller liner is ventilated, has holes all around and reinforced with PVC on the top.
• There is flexible neoprene in the toe area for added comfort.
• A loop with a reflective strip on the back.
• There are also reflective elements on the outside of the roller.
• In the Achilles tendon area, the liner is lowered and V-shaped for increased maneuverability and mobility, making it easier to perform tricks and freestyle movements.
• The lining has cutouts in the area of the ankle flexion sewn with flexible neoprene, which allows for optimal anatomical placement of the shoes while maintaining its stiffness.
• In the lower part of the lining, a material is used that glides less on the skeleton.
• The shoe has an anatomical insole with a thickness of 3 mm, which is comfortable enough, but not too soft.
• Under the insole in the heel part, a silent cushioning block made of TPR material, which perfectly absorbs vibrations and shocks, is quite thick, soft and comfortable.
• The tongue of the insole is sufficiently stiff and thick, it consists of 2 parts, thanks to which it perfectly reproduces the arch of the foot.
• The tongue holds the position well thanks to the use of a string.
• The skids made in CNC technology are strongly reinforced with a three-dimensional structure, very strong, stable and precise.
• Attached to the shoe with 2 central screws and 2 solid aluminum threaded blocks.
• Thanks to these blocks, power transmission is much more efficient.
• The undercarriage can be adjusted transversely and longitudinally.
• The hollow axles for weight reduction have a diameter of 8mm and are mounted on the left reel on the inside and on the right reel on the outside to prevent the bolts from loosening while driving.

Technical parameters

• Recommended use: Sporty and aggressive skating, advanced and experienced riders.
• Category: Urban
• Skeleton: High impact plastic,
• Inner material: thin nylon, absorbent microfiber
• Skids: CNC construction, additionally reinforced, one-piece, laterally and longitudinally adjustable
• Mounting dimensions of the skids: 165 mm
• Wheel size: 110x24mm Wheel type: SPRING Hardness: 85A wheels
• Bearings: High quality ABEC-9 chrome plated with rubber cloth for easy cleaning and maintenance
• Brake: Yes
• Fastening system: Special non-slip laces
• Weight limit: [kg] 100 Optimal sports load level: 4
• The length of the inner insert in cm Size 37 38 39 40 41 42 43 44 45 46 47 cm 23.6 24.5 25.2 25.9 26.6 27.6 28.3 29 - -
• Roll alignment: The roller must be on "contact". The finger should touch the end of the roll, but it should not be tucked in. Why ? The shoe / roll / liner will later disintegrate under the influence of temperature and sweat in the heel / ankle area, causing the foot to move backwards and a slight slack in the front of the shoe instead of pressure.