PUIG House Turn Signals Honda NT650V Deauville 01
Бестселлер
- Артикул:
- 108166785
4 022 ₽
Характеристики
Дизайн
- Цвет
- Черный
Прочие свойства
- Бренд
- Antonio Puig
Описание
Renew the front turn signals of your motorcycle with the new House lights from Puig.
Indicators approved with clear LED glass (70x24mm) and black housing.
Intermittent function.
Certificate of approval E-mark certification.
Technical information.
It should be noted that most motorcycles use bimetallic relays, so their frequency depends directly on the amperage that circulates through the circuit.
When replacing them, this amperage varies and therefore so does the frequency of blinking also.
In case of using electronic relays, whose frequency does not depend on the amperage, it should not affect the blinking.
In case we have doubts about the relay that comes with our motorcycle, it is advisable to mount the indicator and check the frequency.
The intermittent bulb should also be taken into account, in case the bulb´s power varies we must replace it with one of the same power and can be found in our catalog.
If our choice is to use an LED bulb, there are two options to balance the blink frequency:
One resistance must be incorporated in parallel in the circuit of the right side and another one in the left side.
In the case of replacing the 4 flashers, the resistance Ref.
42980 must be used, but if only two are replaced, the resistance Ref.
58730 must be used.
Identify the relay of the motorcycle´s intermittence (location and number of pins) and replace it with the one that corresponds to the list that Puig offers.
In the market there are some motorcycles that do not have a specific relay, which makes it impossible to replace them.
It should also be taken into account that if more than one relay intervenes in the intermittence action, replacing only one will not solve the problem.
Indicators approved with clear LED glass (70x24mm) and black housing.
Intermittent function.
Certificate of approval E-mark certification.
Technical information.
It should be noted that most motorcycles use bimetallic relays, so their frequency depends directly on the amperage that circulates through the circuit.
When replacing them, this amperage varies and therefore so does the frequency of blinking also.
In case of using electronic relays, whose frequency does not depend on the amperage, it should not affect the blinking.
In case we have doubts about the relay that comes with our motorcycle, it is advisable to mount the indicator and check the frequency.
The intermittent bulb should also be taken into account, in case the bulb´s power varies we must replace it with one of the same power and can be found in our catalog.
If our choice is to use an LED bulb, there are two options to balance the blink frequency:
One resistance must be incorporated in parallel in the circuit of the right side and another one in the left side.
In the case of replacing the 4 flashers, the resistance Ref.
42980 must be used, but if only two are replaced, the resistance Ref.
58730 must be used.
Identify the relay of the motorcycle´s intermittence (location and number of pins) and replace it with the one that corresponds to the list that Puig offers.
In the market there are some motorcycles that do not have a specific relay, which makes it impossible to replace them.
It should also be taken into account that if more than one relay intervenes in the intermittence action, replacing only one will not solve the problem.
Мы собрали лучшие предложения по оригинальным брендовым товарам из зарубежных магазинов, выстроили надежную систему доставки и не тратим средства на аренду торговых помещений - это позволяет сделать цены для вас намного ниже местных магазинов.
Непривычно покупать качественные вещи дёшево? Пора начинать это делать вместе с LiteMF Market!»